Adjusting Front and Rear Xtech Brakes on KOMOTO M1100

Created by Anthony, Modified on Wed, 9 Feb, 2022 at 11:53 AM by Anthony

There are three ways to adjust your KOMOTO M1100 brakes. 


The most effective and simplest method to adjusting your performance Xtech brake caliper is by the black screw on the caliper. 

  1. Look at the end of brake wire you will see black spin nut. 
  2. Loosen the nut and then adjust clockwise to tighten. 
  3. Over tightening the brakes you will hear metal noise due to the pads touching the rotor. 
  4. Once adjusted, put the spin nut back in place to ensure does not loosen while in operation.




Second way is to adjust the brake cable. 

  1. You loosen the screw with a 5mm Allen Key and pull the wire though. 
  2. Shortening the wire length will tighten the brake pads. 
  3. This is something you only have to do after long period of ownership. Otherwise always adjust at the brake caliper first.



  1. The third way to adjust your brakes is at the top of your brake handle. 
  2. There is a similar spin nut that is on your performance Xtech brakes. 
  3. Turn counterclockwise to tighten the brakes. Be careful not adjust too much at one time.
  4. This will adjust the brake cable distance to tighten your brakes.


Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons

Feedback sent

We appreciate your effort and will try to fix the article