Installing battery into KOMOTO D2400

1. First start by loosing the top 2 screws on the the running board. 
2. Once you loosen both screws they will not REMOVE but will get loose. stay attached to the running board cover. 
   
3. Open by pulling upward with the screw D-wings
   
4. The running board cover will completely remove from your KOMOTO D2400.
   
5. You will see open compartment you can install your KOMOTO D2400 battery.
6. Postion the battery with the terminals pointing at the rear of the KOMOTO D2400.
7. Place the terminal ends towards the rear KOMOTO D2400 tire.

Make sure to make your deck lid to the right direction when installing.

Most mistakes during installation happen with the running board not being flush. Make sure no wires are sticking up that could cause this.